MK7 Button Configurator
This page is currently in development. We're only accepting pre-approved orders at this time. Please contact us at firstname.lastname@example.org for more information.
Mix and match button graphics and wiring and electronics options.
Electronics And Wiring Options
PDC / PSA: Select these if your vehicle is equipped with park assist options.
Toggle: Includes a SPDT toggle relay module and a 7 ft. wiring harness. This allows on / off functionality. The relay module can be used to switch the power or ground wire of your device. The relay is rated for a 10A restive load or a 5A inductive load. The button's amber LED will alternate on / off when the button is pushed.
Wireless: Includes a 315 or 433 MHz wireless module, for use with an existing two mode wireless product, like a remote controlled exhaust flapper valve. The module can clone the original remote control's signal. The button's amber LED will alternate on / off when the button is pushed.
Garage Control: Includes a garage door opener remote control module, compatible with many brands of openers. Learn more here.
DIY: Includes a basic 6 ft. wiring harness with bare wire leads. For use with the top, two pole momentary button. The wires can be connected to your own device, such as a garage door opener remote, relay or micro controller. Please note, the button is only rated for small signal currents <100 mA. Because the bottom and middle buttons are internally switched to ground, a DIY option is not currently available.
Hatch Harness: Wiring harness that allows the button to open the rear hatch. Learn more here.
Graphic choices are different depending on the button location. The choices are:
PDC, Garage Control (2), Exhaust (3), Spray (5), Traction Control (4), Light (6), Rear Fog (8)
PSA, Garage Control (2), Exhaust (3), Spray (5), Traction Control (4), Light (6), Rear Fog (8)
Garage (2), Hatch (1), Mute (7), R (9)