The Double Apex Garage Control™ is the perfect solution for convenient garage door operation. The button lighting, feel and finish integrate perfectly with your Volkswagen’s interior like it was factory equipped. The universal control module uses an OEM circuit board that is compatible with almost all modern garage door openers. It can operate one or two doors and is simple to install.
Read on to learn more about the design, what cars it fits and the simple installation procedure.
About The Options
All kits are available with a Garage or Gate Button.
Battery Powered Kit – The control module is powered by a long life battery that is easy to change when needed.
12V Powered Kit – The control module is hard wired to your vehicles power so no battery changes are required. This option also adds an extra layer of security as the Garage Control™ will not operate unless the vehicle's key is in the on position.
Additional Garage Control™ Button – Can be added to the Garage Control™ Kit to operate a second door. (Note: The Garage Control can only control one opener that uses a dip switch type remote.)
DIY Garage Control™ Button – For those who want to connect the button to their own remote. The switch function is momentary and comes with 4.5 ft wire leads standard. Custom lengths and a toggle option are also available. For low amperage signal and switching currents only, <100mA. For higher currents a relay must be used. Please contact us for more information.
*See the "This Fits" below for opener compatibility.
Please contact us if you have a right hand drive model.
|VW||MKV Rabbit / Golf||All|
|VW||MKVI Golf R||All|
|VW||MKVI Jetta (2010-2014)||All|
Note: The Garage Control™ Button can be installed in any of the center positions in the button cluster.
Standard installation requires the vehicle have a traction control or push start button. If one isn't available please contact us to request a wire harness extension.
Garage Door Opener Compatibility
The Garage Control Module is compatible with the following residential openers. If your opener is not listed or if you have a commercial opener or gate please contact us to check compatibility.
Chamberlain® / Liftmaster® / Craftsman®
390 MHz Security+ Rolling Code
315 MHz Security+ Rolling Code
390 MHz Billion Code
390 MHz Dip Switch (7, 8 and 9 position)
Genie® / Overhead Door®
390 MHz Rolling Code (Intellicode)
315 MHz Rolling Code (Intellicode)
390 MHz Dip Switch (9 and 12 position)
Not compatible with Genie / Overhead openers manufactured from 2016 to present. The serial number of included openers will contain the two-digit year in the first four digits. (16, 17, 18, 19 etc.)
300 MHz MultiCode
318 MHz MegaCode
310 MHz Dip Switch (8 position)
310 MHz Rolling Code (SecureCode)
310 MHz Dip Switch (10 position)
Wayne-Dalton 372 MHz
300/310/315/372/390 MHz compatible
Pre 1993 openers without safety reversing sensors are not supported.
Not compatible with 433 mHz systems.
Not compatible with garage door openers manufactured by Marantec or Hormann.
Not compatible with Genie / Overhead openers manufactured from 2016 to present.
Chamberlain, LiftMaster and Moore-O-Matic are trademarks of Camberlain Group. Genie is a trademark of Overhead Door Corporation. Overhead Door is a trademark of Overhead Door Corporation. Linear is a trademark of Linear Corporation. Craftsman is a trademark of Sears, Roebuck and Company. Stanley is a trademark of The Stanley Works. Wayne Dalton is a trademark of Wayne Dalton Corporation. These companies are not affiliated with Double Apex LLC in any way.
The universal Garage Control™ module uses an OEM circuit board that is compatible with almost all openers from major brands including LiftMaster®, Linear®, Moore-o-Matic®, Stanley®, Overhead Door®, Wayne-Dalton®, Craftsman®, Chamberlain®, and Genie®. (See applications tab for a complete list.) It can be connected to two buttons and support two separate openers. Programing is simple with smart button or dip switch support. Battery powered and hardwired configurations are available.
Factory like integration requires factory quality parts. An OE Volkswagen button base is used to ensure perfect fit, lighting and operation. An OE connector is also used and the button top is finished with an OEM, interior grade, coating. All wiring is covered with a premium braided sleeve that both protects and suppresses any noise from wire movement.
Please note: Standard installation requires the vehicle have a traction control or push start button. If one isn't available please contact us to request a wire harness extension.
Chamberlain®, LiftMaster® and Moore-O-Matic® are trademarks of Camberlain Group. Genie® is a trademark of Overhead Door Corporation. Overhead Door® is a trademark of Overhead Door Corporation. Linear® is a trademark of Linear® Corporation. Craftsman® is a trademark of Sears, Roebuck and Company. Stanley® is a trademark of The Stanely Works. Wayne Dalton® is a trademark of Wayne Dalton Corporation. These companies are not affiliated with Double Apex LLC in any way.